Matrix has done it again! This 2300mah is probably the best crane stock battery you can get if you want to stay NiMh instead of going lipo and you have a standard type crane stock. (If you have the Sub C fat type crane stock by Classic Army, you may be able to use the 3000mah, but this one will still fit and fit much easier!).
Dimensions: Diameter: 14mm Length: 150mm / 100mm (2 long sticks / Single short stick). Amp: 2300mah. Voltage: 9.6V Type / Plug Type: Small Type. Small Type Tamiya Chemistry: NiMh Cell Size: AA Cell Number: 8 Wrapping: Black
Common FAQ / Battery 101: - NiMh battery does NOT require discharging. At any battery level, you can just charge it up to full. - The "Crane" configuration is perfect for crane stocks widely used by different manufacturers. - If your application has a "large tamiya plug" all you need is an adapter. - Amp = Capacity. The higher the Amp the longer you can use it before recharging. Voltage = Power. The higher the voltage, the faster your motor turns, and the more power your motor will have.
Charging 101: Charging time with a standard wall charger, when the battery is complete empty is ~6 hours. Smart charger recommended (A smart charger can charge NiMh batteries at any time and stop charging when the battery is full. Always monitor battery charging and charge batteries on a non-flammable surface.)
Matrix batteries are high drain application battery that gives you even better output than Sanyo and other leading brand batteries.
Buy Sell Trade info here. Possible future feature.